| |
|
|
|
Flashing |
 |
|
Flashing
A system used
to seal the edges of a membrane at walls, expansion
joints, drains, gravel stops, and other areas where the
membrane is interrupted or terminated. Base flashing
covers the edges of the membrane. Cap flashing or counter
flashing shields the upper edges of the base flashing.
Note: All of the metal flashing as seen here are custom made. These are
just a few samples of the most common types fabricated.
|
|
|
|
|
Customized Flashing
The way you need
it, any angle / size / metal / color you
need.
|
 |
|
|
|
|
|
Baldy
The way you need
it, any angle / size / metal / color you
need.
|
 |
|
|
|
|
|
Drip Edge
A metal strip
placed along the edge of a roof to divert water.
This type is normally used for roof metal. Any
angle / size / metal / color you need.
|
 |
|
|
|
|
|
Drip Edge 2
A
metal strip placed along the edge of a roof to
divert water.
This type is normally used for roof metal. Any
angle / size / metal / color you need. |
 |
|
|
|
|
|
Drip Edge 3
A
metal strip placed along the edge of a roof to
divert water.
This type is normally for non-metal roofing.
Any angle / size / metal / color you need.
|
 |
|
|
|
|
|
Gravel Stop
A flanged device,
designed to provide a continuous finished edge for
roofing materials, and to prevent the loss of gravel
from washing off the roof. Any angle / size /
metal / color you need.
|
 |
|
|
|
|
|
Step Flashing
Individual
pieces of sheet metal material used to flash walls,
around chimneys, dormers and such projections along
the slope of a roof. Individual pieces are
overlapped and stepped up the vertical surface.
Any angle / size
/ metal / color you need.
|
 |
|
|
|
|
|
Valley
The
internal angle formed by the intersection of two
sloping roof planes. Any angle / size / metal /
color you need.
|
 |
|
|
Fully Licensed &
Insured
MA HIC REG. # 159489 - MA CSL # CS40485 |
|
|
|